Dalian xinli test equipment limited company

Brief introduction of company and product
Dalian xinli test equipment limited company was established in 2004, and it's predecessor named xinli test equipment factory which founded in 1999, located in Ganjingzi district , Dalian.It's a professional manufacturer in the field of producing affordable-type material mechanics testing equipment and building structure testing equipment. Our products are suitable for various academies at all levels of professional engineering to demonstrate material mechanics and building structure teaching experiments.These devices not only can be used for non-destructive testing device experiments, but also used for destructive testing of materials testing machine, torsion testing machine, bending experiments of reinforced concrete beam device. These test devices are the company's original equipment, and some of them are national patent. They are based on intuitive theory, designed to simple structure and small light weight body. They are convenient to use the move and the price is quite low. After years of continuous improvement and promotion, our products have been widely used in universities of science and technology in various types, stood the test of practice, welcomed by the users.

Material mechanics testing equipment
The material mechanics testing equipments of our company can complete all the basic teaching experiments of material mechanics, and they are conductive to open teaching, helpful in training the abilities of students and boosting interest in experiments. Accuracy is also fully meet the requirements of teaching experiments. Manual digital material testing machine(Accuracy is also meet the requirements of engineering experiment.) and teaching torsion testing machine are used to do destructive experiments. A variety of small test bench are used to do non-destructive experiments.Manual digital material testing machine is our company's competitive products, and it's simple as well as advanced. The machine uses screw mechanism cycloid reducer with manual loading; no-load speed mobile need for rapid lifting beams. Therefore, electric lift with no load and take a number of safety devices to ensure the safety of experiment. Sensor measures the force, and electronic instrument displays the number of force. Plus hardware and software to connect the computer with the experimental data collection, recording, display, calculation and drawing. After reading the books on the basis of experiment, under the direction of the teachers' simple explanation in class, students can experiment with the independent operation of test machine.
Teaching torsion testing machine, JNSG-144 is a mechanical type, and JNSG-150 model is a electronic one. By contrast, JNSG-144 is more affordable,and therefore most colleges and universities adopt this type.
There are two types of small-scale test bed, one is based on weight load,and another one is worm gear screw mechanism with manual loading, with sensor measuring the force and electronic instrument displaying the number of force. School teachers can select according to their preferences. The weight load type is more affordable. This type is promoted for many years, but still enduring. The structure of the device are optimized, and the strength, rigidity and stability of the main components are calculated accurately. This makes the device structure particularly reasonable, special light weight. Several small-scale test bed loaded with a lever to enlarge in order to aquire large load, and the magnification ratios are 1:10(Bending and torsion test bench) 1:20(Pure bending normal stress test bed) 1:40(E test bench). Mechanics laboratory equipment itself should fully reflect the mechanics characteristics. By mechanical analysising and calculating the structure and components of the equipment rationality, students can also enhance their mechanical concepts and improve their IQ.

Building structure testing equipment
Our company currently produce steel truss Static load test device, concrete straight beam bending test device and we research 2000KN digital hydraulic pressure testing machine, which can be used to fulfil static loading test of steel truss traight beam bending experiments of reinforced concrete estructive test of reinforced concrete columns and experimental compressive failure of brick masonry. The experiments above are common ones in building stucture.
One tatic loading device of steel truss
The max test force is 30KN, and the span is 2400mm. Loading device, weighing about 280kg dimensions: LxWxH=2600x1140x168. Weighing about 50kg, dimensions LxWxH=2500x84x372. Hand-loaded screw jack(1:3 by the sprocket chain drive transmission), sensor measures the force and the electronic instrument displays the number of force, force error of less than 1%, equipped with overload protection device. Under the experimental device beams off the ground 210mm, it's convenient to load or unload steel and other objects by manual hydraulic forklift. It's loaded with screw jack so as to load stable and easy to control the load value. With block extended beam by beam, column with gantry,we can shorten the length of the device and the top beam of the span. The weight of the device is greatly reduced, and it's more convenient to load for transporting.
Two oncrete straight beam bending test device
The max test force is 150KN, and the span is 1800mm. Weighing about 600 kg, dimensions : LxWxH=2600x1560x2132. Hand-loaded screw jack(1:18 through the sprocket chain and gear transmission), sensor measures the force and the electronic instrument displays the number of force, force error of less than 1%. Under the experimental device beams off the ground near 180mm, it's convenient to load or unload reinforced concrete beams and other objects by manual hydraulic forklift. Straight beam of reinforced concrete reference dimensions L×W×H =2000×120×200. It's loaded with screw jack so as to load stable and easy to control the load value. With block extended beam by beam, column with gantry,we can shorten the length of the device and the top beam of the span. The weight of the device is greatly reduced, and it's more convenient to load for transporting. Two speed gear box block can transform, the fast block usd to contribute to the rapid lifting beam, and the slow block used to load. Support for implementation of reinforced concrete simply supported straight beam, Contribute to direct beams of reinforced concrete beams pressurized contact surface to achieve universal.
Three 2000KN digital hydraulic pressure testing machine
It's a product under development. Electric pump drive hydraulic jack load, 250mm piston stroke, manually control the loading speed, the max pressure is 2000KN. sensor measures the force and the electronic instrument displays the number of force, force error of less than 1%. Upper and lower pressure plate away from 0~1000mm, pressure plate size 400mm × 400mm, it's sufficient to meet the test of reinforced concrete columns and brick destructive compression fracture tests on the pressure plate spacing requirements. Host weighs about 2500kg, and dimensions: L×W×H =1000×1000×28000.

Dalian xinli test equipment limited company

Yao Zhiguo Manager

Products Material mechanics testing equipment &Building structure testing equipment
Add ganjingzi District dalian liaoning Province china 116035
Domestic Tel: 0411-86895037 Mobile Tel: 13998611966
International Tel: +86 411 86895037