Sequence number

Name

Modal number

Utility

     Remark

 1

Digital hydraulic pressure testing machine

SYYS-2000

Large-scale building component destructive compression test

It's a product under development. Electric pump drive hydraulic jack load, 250mm piston stroke, manually control the loading speed, the max pressure is 2000KN. Sensor measures the force and the electronic instrument displays the number of force, force error of less than 1%. Upper and lower pressure plate away from 0~1000mm, pressure plate size 400mm × 400mm, it's sufficient to meet the test of reinforced concrete columns and brick destructive compression fracture tests on the pressure plate spacing requirements. Host weighs about 2500kg, dimensions L×W×H =1000×1000×28000 .

2

Static loading device of steel truss

GHJZ-30

Static

Loading test of steel truss

The max test force is 30KN, and the span is 2400mm. Loading device, weighing about 280kg, dimensions L×W×H=2600×1140×1680 . Steel truss weighing about 50kg, dimensions L×W×H=2500×84×372 . Hand-loaded screw jack(1:3 by the sprocket chain drive transmission), sensor measures the force and the electronic instrument displays the number of force, force error of less than 1%, equipped with overload protection device. Under the experimental device beams off the ground 210mm, it's convenient to load or unload steel and other objects by manual hydraulic forklift . Steel truss not included.

3

Steel truss

GH-20

As above

Weighing about 50kg.Dimensions: Length

×Width×Height=2500×84×372 . By the 40x40x4 angle iron welded together.The maximum force is 20KN in the frame.

4

Concrete straight beam bending test device

TLWZ-150

Bending experiment of

reinforced concrete beam

The maximum testing force is 150KN. The span is 1800mm. Weighing about 600kg dimensions 2600×1560×2132 . Hand-loaded screw jack(1:18 through the sprocket chain and gear transmission), sensor measures the force and the electronic instrument displays the number of force, force error of less than 1%. Under the experimental device beams off the ground near 180mm it's convenient to load or unload reinforced concrete beams and other objects by manual hydraulic forklift. Straight beam of reinforced concrete reference dimensions L×W×H =2000×120×200 .User owned.